Windows Server - SBS2003 Shows multiple IP addresses
Asked By Ferrell Ramey
15-Jan-10 11:10 AM
I have two nic's in my server, but one is disabled. When I do a network scan
I see the IP address of the server twice. The real on 192.168.1.2 and
another time at 192.168.1.89
I can ping .89 and it is alive and is the SBS2003 server. My server is VERY
slow and I am not sure that this has anything to do with it, but I'd like to
resolve it if it is an issue.
--
Thanks!
Ferrell
NetBIOS
(1)
VPN
(1)
Explanation.Ferrell
(1)
Subnet
(1)
SBS2003
(1)
RRAS
(1)
WINS
(1)
DNS
(1)
Cliff Galiher - MVP replied to Ferrell Ramey
Are you *sure* that NIC is disabled?
Let's start with an ipconfig /all from the server.
-Cliff
Joe replied to Ferrell Ramey
it is not associated with a particular NIC, but with RRAS. If you dig
through the RRAS management, you will find it referred to as the
'internal' interface though, as you have found, it is reported on external
scans. If you use VPN, it is the address used for the SBS end of the tunnel.
--
Joe
Ferrell Ramey replied to Cliff Galiher - MVP
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network
Connection #
2
Physical Address. . . . . . . . . : 00-13-72-F7-4F-E0
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.2
Primary WINS Server . . . . . . . : 192.168.1.2
PPP adapter RAS Server (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.89
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
--
Thanks!
Ferrell
Ferrell Ramey replied to Cliff Galiher - MVP
Cliff, thanks for the quick response.
I do not ever remember configuring the second NIC and I actually used the
Wizard to set the server up. Is the PPP setup normal?
--
Thanks!
Ferrell
Ferrell Ramey replied to Joe
Joe, that makes since. Thanks for the explanation.
Ferrell
DNS and NetBIOS names not resolving over a PPTP VPN using RRAS Windows Server Short question: How does one enable the resolution of DNS and NetBIOS names on a remote network from a client over a PPTP VPN? Backstory: I have a PPTP VPN facilitated by a Windows Server 2003 machine with RRAS VPN traffic is forwarded through a firewall to the RRAS machine. NetBIOS and DNS names other than the server's are not being resolved even though they view [RRAS server name]' will respond, however 'net view [any other computer name on the VPN's network]' will not respond. I get the error message "System error 53 has occurred
Can not Map Network Drive using VPN VPN by T-1 Provider w / cisco s Windows Server Currently, I have small business server 2003 with remote access operating, I can use the VPN to access the network and then use the remote desktop. I can not browse or map the shares on the server over the VPN. I can browse and map the shares on the server from local clients. T The VPN services are provided by our T-1 provider (Cbeyond.net) which uses a Cisco concentrator server funtion. I can not determine the correct SBS 2003 settings that will allow a VPN client to map the network drive. Any ideas? Windows Server SBS Discussions VPN (1) SBS (1) ChicagoCPA (1) WhichWhen (1) DNS (1) CSS (1) IP (1) MSFT (1 here. From the post, I understand that you can not access share folders via hardware VPN, but you can access the share folders from local client. So the SBS configuration is
A PC with 2 NICs, one for SBS network, one for VPN, VPN does not work if the PC is connected to SBS network Windows Server This PC NICs, one is connected to SBS network, the other one is connected to a Juniper VPN router which is totally isolated from SBS network. We noticed that we could not leave this PC connected to SBS network if we want to use VPN. If we disconnect from SBS network VPN works fine. Is there any way we can leave both NICs connected and use VPN? If we disconnect from SBS network, the user can not use internet. I have a a lot Jack Windows Server SBS Discussions Windows Small Business Server 2008 (1) NICs (1) VPN (1) Junipter (1) Netgear (1) Juniper (1) Trainer (1) YHi (1) Yes, it is routing manual routes in the PC for the other NIC. These routes will be used for VPN traffic in preference to the default gateway. As Cris says, you need to look at
VPN vs. VLAN Windows Server I'm setting up a totally isolated VLAN for testing and bumped into a few issues connecting to it via RRAS's VPN. VPN via PPTP works. I can connect to the Win2k DC running RRAS from a XP RAS enabled - - not Routing for LAN nor LAN and dial-in - - that it would keep VPN clients unroutable from the physical LAN and essentially create a VLAN. Maybe I misunderstand how Microsoft wants this done? I want DHCP leases given from the server so that VPN clients are totally integrated in AD / DDNS. This is not possible with the IP List daemon I had unbound the server's DHCP service from the local NIC. Yet a VPN client gets an IP from the LAN router, so I'm doing something wrong. It http: / / appstate.edu / ~jp59031 / week." - Ignignokt Windows 2000 Networking Discussions Windows Server (1) XP (1) VPN (1) Ignignokt (1) Segments (1) Masks (1) Missunderstandings (1) Connectivity (1) The VPN Server must be in the LAN Segment that you want the users to be in